Pepperl+Fuchs VisuNet GXP Series System Manual page 15

VisuNet GXP RM-GXP1100 and RM-GXP1200
Mechanical Installation
While manually securing the housing (e.g. by holding on to it), tip the display panel towards
you until the display comes to rest in its fully openend position, hanging down at an angle from
its tightened strings.
Place the washers onto the screws and then use a tightening torque to attach the nuts to the
headless screws using a torque of 7.5 Nm.
Tip
Secure the screws with a medium strength bolt adhesive (e.g. Loctite® Threadlocker Blue
242®)
16