VisuNet GXP RM-GXP1100 and RM-GXP1200
Mechanical Installation
3. Remove the grounding cable from the grounding bolt at the back of the display unit.
4. Now the display unit can be removed from the enclosure completely. During the removal
process, make sure to hold the display unit steady so it cannot fall down, preferably with the
help of another person, and to place it on an upholstered and even surface after removal. To
remove the display unit from the enclosure, take the two strings out of the carabiners and
remove the 4 screws with which the 2 angle brackets are attached to the display unit (1).
Then remove the display unit from the housing (2).
1. Please use a torque of 4 Nm for tightening the grounding bolt during the display unit reassembly process where
these steps are performed in reverse order.
24
1.
1