Jacto ARBUS 1000 Operator's Manual page 33

ARBUS 1000
A
Mounting the sprayer to the tractor (Arbus with fixed axle)
B
C
With the draw bar in the chosen position
(see draw bar adjustment), perform the con-
necting procedure as follow.
• Remove the plastic straps used in the
hitch fork (A).
• Place the fork in a horizontal position and
insert the fork pin into the hole.
• Place the tractor's draw bar between the
hitch fork and remove the pin from the
side hole.
• Place the hitch pin through the hitch hole
and the tractor's drawbar.
• Place the clevis pin (C) in the hole of the
hitch pin.
• Install the safety chain, but allow enough
slack for maneuvering.
2
2-33