Jacto ARBUS 1000 Operator's Manual page 84

Tower kit for Arbus 1000 (Optional)
4
6. To remove the fan guard screen and the
branches, loosen the fastening bolts on
the spacer bushings (detail E) and remo-
ve them.
NOTE:
The spacer bushings (detail E)
will be replaced by the new ones
that are included in the Tower
kit. After removing the spacer
bushings (detail E), keep them in
an appropriate place with easy
access for future use in the ma-
chine without the Tower kit
7. Pull the ring and remove the quick rele-
ase clamp (detail F). Then disconnect the
hose from the left and right branches
(G).
8. Remove the left and right branches.
4-84
ARBUS 1000
E
F
G