Jacto ARBUS 1000 Operator's Manual page 102

Triple wash of chemical containers
4
After having washed the package contamina-
ted by mix, it is necessary to do a triple wa-
shing of the containers. For this, follow the
instructions below:
• Use personal protective equipment –
PPEs (gloves, apron, overalls, protective
glasses, hat, boots, masks).
NOTA:
This equipment does not have
a backup reservoir for package
washing.
• Fill out the package with approximately
1/4 of its volume with clean volume, place
a lid over the package and tighten enough
to avoid leaking during shaking.
• Vigorously shake the package in all direc-
tions for approximately 30 seconds, to re-
move the product residues that got stuck
on the internal walls of the package.
• Remove the package lid and carefully place
water for washing inside the package washer.
• Repeat this operation twice.
• Careful not to damage package label pun-
ch holes in the package in order to avoid
its reuse. Avoid damaging package labels
so that the chemicals can be identified af-
ter the package is no longer in use.
ATTENTION!
After the package is no longer in use they can be temporarily stored in an appro-
priate place until they are placed at their final destination.
Flexible packages should be stores and returned in specific bags designed for this
function.
4-102
ARBUS 1000