Jacto ARBUS 1000 Operator's Manual page 99

ARBUS 1000
open
Procedures for using the package washer
• Fill up the chemicals reservoir with ap-
proximately 90% its capacity.
• Place the chemicals in the reservoir.
• Activate the tractor power take-off.
close
• Place the container over the package
washer and activate the lever of the di-
rectional valve in order to internally clean
the container.
• Fill up the sprayer reservoir with water.
NOTE:
Lever 1 of the flow regulating
valve should be positioned to
allow the return of the mix to
the reservoir (closed).
ATTENTION!
Use the personal protective
equipment recommended for
this operation.
NOTE:
Rotate the package over the wa-
sher or 30 seconds, trying to com-
pletely clean the internal part of
container with the water jet.
ATTENTION!
Never activate the directional
valve if there is no container
over the package washer.
After pressure wash, do the final
package rinsing.
4
4-99