Jacto ARBUS 1000 Operator's Manual page 56

Nozzles holders
4
Nozzle holder with valve
• The nozzle holders with valve can be ad-
justed to desired angle and can be shut
off individually.
OBSERVATION:
To adjust the nozzle, loosen the
nut (1), set it in the desired posi-
tion and retighten the nut.
ATTENTION!
Do not overtighten the nut.
Double nozzle (Optional)
• Directing the nozzle
Loosen the nut (1) and set the desired
nozzle at the mark (A) existing on the
nozzle body.
NOTE:
This mark indicates the spray
direction. So the nozzle at this
mark is turned on.
• Changing the spray volume:
With a simple 180º turn of the nozzle
holder it is possible to turn off one nozzle
and turn on the other.
• Shutting the flow:
Just give the nozzle holder a 90º turn in
relation to the mark (A) and the flow will
be turned off.
4-56
Arbus 1000
(with JP-100 pump)
Arbus 1000
(with JP-75 pump)
Double nozzle holder
90 0
ARBUS 1000
1
1
1
180
0