Jacto ARBUS 1000 Operator's Manual page 124

Tire change
5
• When raising the equipment to change ti-
res or track width require much attention
• Keep the machine connected to the trac-
tor on a level and firm ground.
To change the tires, proceed as follows:
• Lift the sprayer with the appropriate
hydraulic jack (lift capacity over 2000 kg
in each point) through the points (A).
• These operations must be done with the
sprayer tank empty.
Changing tires:
• Always deflate the tire before removing
the object that punctured it.
• The tires disassembly and assembly servi-
ces must be done by trained people. When
pumping up the tire, never exceed the
manufacturer's recommended pressure.
Over pressurizing the tire can cause it to
blowout which can result in a serious injury.
• If it is necessary to repair the wheel/rim,
disassemble the tire.
5-124
ARBUS 1000
B B
A