Jacto ARBUS 1000 Operator's Manual page 118

PTO shaft (conventional) ARBUS 1000
5
Disassembly
1. Remove locking screw.
2. Turn the cone up to the indicated position.
3. Loosen the safety protection.
4. Remove the slide ring.
Assembly:
1. Clean and lubricate the PTO shaft bars.
2. Install the sliding ring into the recess
with the grooves facing the bar.
3. Fit the safety protection.
4. Turn the cone until the indicated position.
5. Fasten the locking screw.
5-118