PCE Health and Fitness TTC 30 User Manual page 30

4.3.2 RAMP Page
Parameter Name
Low
High
Hold@0%(s)
Rise Time (s)
Hold@100%(s)
Description / Options
Starting Value of Ramp
Enter value according to TC Display Mode. If display
mode is actual, enter value in temperature/mV and if
display mode is %, enter value in %.
Ending Value of Ramp
Enter value according to TC Display Mode. If display
mode is actual, enter value in temperature/mV and if
display mode is %, enter value in %.
Time to wait at Low (0%) level in second
This parameter is used for Repeat Format UP/DOWN or
DOWN/UP.
Range:
0 ... 9999
Time to Increase from Low to High Level.
Range:
1 ... 9999
Time to wait at High (100%) level in second
This parameter is used for Repeat Format UP/DOWN or
DOWN/UP.
Range:
0 ... 9999
© PCE Instruments
28