Table of Contents
Advertisement
Source Mode
Reset Additional Info
4.3.1
STEP Page
Parameter Name
Low
High
Manual
(Output Type)
TC Source Output Format
This option appears only if TC Mode is SOURCE
Available Options:
STEP
RAMP
At a time one can be selected.
Press F1 key on one of the options for more settings.
Reset the Additional Information of Measure mode like
Minimum and Maximum This option appear only if TC
Mode is MEASURE.
Description / Options
Starting Value of Step
Enter value according to TC Display Mode. If display
mode is actual, enter value in temperature/mV and if
display mode is %, enter value in %.
Ending Value of Step
Enter value according to TC Display Mode. If display
mode is actual, enter value in temperature/mV and if
display mode is %, enter value in %.
Step Manual Mode Selection CheckBox
Ticking this checkbox will enable Step Manual Mode and
Un-ticking will enable Auto Step Mode.
© PCE Instruments
25
Advertisement
Table of Contents
