Table of Contents
Advertisement
iii. CheckBox
CheckBox is used where Binary Value (1/0, True/False) is available for any parameter.
To change the CheckBox status, press F1 key. This will enter edit mode. In this mode, status can
be toggled by pressing F1 key. Press MENU/ENT key to store new status.
iv. RadioButtonBox
Radio Button Box is used where very few values can be possible and all the available values
need to be visible.
In this device, two types of Radio Button Box are available. One with 1 value can be selectable &
the other where 1 or 2 values can be selectable at a time.
In Radio Button Box the other option can be selected by pressing MENU/ENT key on that option.
When pressing this key the new option will be selected and the other option will be disabled.
Below an example is given, How to change TC Source Mode from STEP to RAMP.
© PCE Instruments
19
Advertisement
Table of Contents
