Table of Contents
Advertisement
Step Time (s)
Step Definition
Step
Define Steps
Repeat Format
Repeat
Repeat Counts
Enter the time for a single step in seconds
Range:
1 ... 9999
This parameter is enabled only for Auto Step Mode
(Manual CheckBox is Un-Checked)
Step Definition for the Step function
Available Options:
Temperature (Appear only if TC Display mode is Actual)
Percentage (Appear only if TC Display mode is
Percentage) User Defined
Step Value in Temperature/mV/% according to TC
Display Mode and TC unit
Only appears if Step Definition is Temperature or
Percentage.
User Defined Step value for Manual and Auto Step
Mode.
This option appears only if Step Definition is User
Defined. Maximum 10 step value can be configured.
First enter the no. of step and then define step value in
serial order.
How the stepping should be done.
Available Options:
UP
DOWN
UP/DOWN
DOWN/UP
This parameter is enabled only for Auto Step Mode
(Manual CheckBox is Un-Checked)
Defines how many times the steps are repeated
Range:
1 ... 9999
This parameter is enabled only for Auto Step Mode
(Manual CheckBox is Un-Checked)
© PCE Instruments
26
Advertisement
Table of Contents
