Sony POWER HD FX PDW-700 Operation Manual page 138

No. Page
29 SELECT
FUNCTION
138 Menu List
Item Settings
LETTER BOX DISABLE/ENABLE
FOCUS MAG DISABLE/ENABLE
HD t SD PHASE
Display only
DELAYED
REF t HD-Y PHASE
Display only
DELAYED
Description
Enable the selection of "LETTR"
(LETTER BOX) in the DOWN
CON MODE item on the
OUTPUT 2 page.
Note
Breakup may occur in output
signals and in the video and audio
of this unit for about 5 to 10
seconds immediately after this
setting is changed.
Enable the assignment of the
FOCUS MAG function to the
ASSIGN switches.
Note
Breakup may occur in output
signals and in the video and audio
of this unit for about 5 to 10
seconds immediately after this
setting is changed.
Appears when LETTER BOX is
set to "ENABLE", or when
FOCUS MAG is set to
"ENABLE".
Note
In these states, the phases of HD
output and SD output from this unit
do not match.
Appears when FOCUS MAG is
set to "ENABLE".
Note
In this state, the phase of HD-Y
output from this unit does not match
the phase of the GENLOCK IN
signal. When multiple PDW-700
units are daisy chained via this unit
(see page 70), inter-system phases
do not match.