Sony POWER HD FX PDW-700 Operation Manual page 153

No. Page Item
12 CAM REC TALLY
CONFIG 1 BLINK
REC START
BEEP
SUB LCD MODE
SEL
SUB LCD TIMER 1H/3H/8H
HDSDI REMOTE
I/F
PROAV DISPLAY DSABL/ENABL Specifies whether to display the PROAV folder
Settings Description
OFF/ON Turns the tally illumination control on or off when
the battery is almost exhausted or the disc is almost
full.
OFF/ON Turns on or off the REC START/STOP alarm
sound.
TIMER/OFF/ Sets the timecode (TC) display after poweroff as
CONT follows.
TIMER: The TC display turns off after the elapse
of the time set by the SUB LCD TIMER
below.
OFF: Not displayed.
CONT: Displayed.
Sets the duration of time after which the TC
display is to be turned off after power-off, when the
SUB LCD MODE SEL item, above, is set to
"TIMER" (H: hours).
OFF/CHARA/ Selects whether to use the function that enables
G-TLY/R-TLY recording control from this unit of an external
device connected to the SDI OUT 1/2 connectors
(HDSDI output) of this unit.
indication that shows whether the external device is
recording.
OFF: Do not use the remote recording control
function.
CHARA: Use the function, and indicate by the
controlling external device indicator in the
viewfinder (see page 33).
G-TLY: Use the function, and indicate by the
TALLY indicator in the viewfinder.
R-TLY: Use the function, and indicate by the REC
(recording, red tally) indicator in the
viewfinder.
Note
When R-TLY is selected, the REC indicator lights even
when the unit is not recording.
when this unit is accessed by a FAM/FTP
connection.
DSABL: Do not display.
ENABL: Display.
g)
Also selects the
Menu List 153