Sony POWER HD FX PDW-700 Operation Manual page 62

repeat this until the desired mode or
speed appears.
When all modes and speeds are displayed,
the display changes in the following order.
Standard mode (with system frequency: 59.94i)
SLS mode
If you have changed the configuration, only
the selected modes and speeds appear.
• When the unit is shipped from the factory, it is
configured to display all of the modes and
speeds in "Shutter modes" on page 60, except
SLS mode. You can change this configuration
by selecting only the required modes and
speeds on the SHT ENABLE page of the
OPERATION menu (see page 134).
• Shutter speeds in standard mode can also be
switched to angle display by using SHT DISP
MODE in the CAM CONFIG 2 page of the
MAINTENANCE menu (see page 154).
To set the shutter speed in ECS or SLS
mode
1
Set the shutter speed mode to ECS or
SLS (see the previous item).
2
Turn the MENU knob to select the
desired frequency or number of frames.
When the RM-B150 Remote Control Unit is
connected
You can set the shutter speed of ECS or SLS with
the rotary encoder of the RM-B150.
To change the range of choice of shutter
mode and speed settings
You can reduce the time required to select the
shutter mode and speed by narrowing the choice
of settings in advance. This can be done by using
the SHT ENABLE page of the OPERATION
menu.
Note
The settings selected on the SHT ENABLE page of the
OPERATION menu become invalid when the RM-B150
or another remote control unit is connected to the
camcorder.
62 Setting the Electronic Shutter
1
ECS mode
2
3
4
Display the SHT ENABLE page of the
OPERATION menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" on page 163.
022 SHT ENABLE
SHUTTER ECS :
SHUTTER SLS :
SHUTTER 1/100 :
SHUTTER 1/125 :
SHUTTER 1/250 :
SHUTTER 1/500 :
SHUTTER 1/1000 :
SHUTTER 1/2000 :
Turn the MENU knob to move b to the
shutter mode or shutter speed you want,
then press the MENU knob.
b on the left of the selected item changes to
z and z on the left of the setting changes to
?.
Turn the MENU knob until "ON"
appears, then press the MENU knob.
z on the left of the selected item changes to
b and ? on the left of the setting changes to
z.
To set another mode or speed, return to step
2.
Note that only the shutter speeds set to "ON"
can be selected with the SHUTTER selector.
To end the menu operation, set the
MENU ON/OFF switch to OFF or close
the cover of the menu operating section.
The menu disappears from the screen and the
display indicating the current status of the
camcorder appears along the top and bottom
of the screen.
ON
OFF
ON
ON
ON
ON
ON
ON