Sony POWER HD FX PDW-700 Operation Manual page 152

No. Page
10 TIMECODE
11 ESSENCE
MARK
152 Menu List
Item Settings
TC OUT AUTO/GENE
DF/NDF DF/NDF
(When SYSTEM
FREQUENCY is
set to "59.94i")
EXT-LK DF/NDF INT/EXT
(When SYSTEM
FREQUENCY is
set to "59.94i")
EXT-LK UBIT INT/EXT
LTC UBIT FIX/TIME
VITC UBIT (SD) FIX/TIME
(When the CBKZ-
MD01 is installed)
WATCH AUTO OFF/ON
ADJ
UBIT GROUP ID 000/101
VITC INS LINE 1 NTSC: 12H to
(When the CBKZ- 16H to 19H
MD01 is installed) PAL: 9H to 19H
to 22H
VITC INS LINE 2 NTSC: 12H to
(When the CBKZ- 18H to 19H
MD01 is installed) PAL: 9H to 21H
to 22H
RET SHOT OFF/ON
MARK 1
RET SHOT OFF/ON
MARK 2
INDEX PIC. POS 0SEC to 10SEC
(in 1 sec steps)
Description
Selects the timecode signal output.
AUTO: Outputs the timecode generator output
during recording and outputs the timecode
reader output during playback.
GENE: Outputs the timecode generator output
during recording and playback.
Sets DF or NDF mode.
DF: Drop frame mode
NDF: Non-drop frame mode
Selects either internal setting or external setting for
DF/NDF.
INT: Internal
EXT: External
Sets whether the LTC UBIT setup value locks to an
INT or an EXT source when the timecode is locked
to an external source.
INT: Internal lock
EXT: External lock
Sets the data to be recorded in U-BIT of LTC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
Sets the data to be recorded in U-BIT of VITC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
Matches the time of the internal clock with the time
data of the user bits of an external timecode. Turns
the automatic time correction function of the
internal clock on or off.
Selects the U-BIT GROUP ID.
Selects the line into which VITC is to be inserted.
For details, see "Recording essence marks" on
page 80.
For details, see "Setting the thumbnail image at
recording time" on page 81.