Remaining Clips Display; Iris Setting/Auto Iris Override - Sony POWER HD FX PDW-700 Operation Manual

Examples of remaining recording time indication
Indication
.
.
.
110 <
100 <
90 <
90 - 85
85 - 80
.
.
.
20 - 15
15 - 10
10 - 5
5MIN (flash)
4MIN (flash)
3MIN (flash)
2MIN (flash)
1MIN (flash)
0MIN (flash)
s Remaining clips display
Displays the remaining number of clips that can
be recorded. The display flashes once per second
when the number of remaining clips is less than
10.
t Iris setting/auto iris override
Indicates the F value (iris setting) of the lens.
Auto iris override is shown by an indicator made
up of two segments each on the upper and lower
sides.
For details, see "Changing the Reference Value for
Automatic Iris Adjustment" on page 63.
u External input status
When the REC VIDEO SOURCE item on the
SOURCE SEL page of the OPERATION menu
has been set to EXT, then "EXT" and the signal
type (HDSDI, SDSDI, or VBS) flashes when a
valid signal is input to this unit.
For details, see "Recording video from external
devices" on page 93.
v Setting change and adjustment
progress message display area
For details, see "Change confirmation/adjustment
progress messages" on page 172.
34 Locations and Functions of Parts and Controls
Remaining recording
time
.
.
.
120 to 110 minutes
110 to 100 minutes
100 to 90 minutes
90 to 85 minutes
85 to 80 minutes
.
.
.
20 to 15 minutes
15 to 10 minutes
10 to 5 minutes
5 minutes
4 minutes
3 minutes
2 minutes
1 minutes
0 minutes