Tripod Mounting - Sony POWER HD FX PDW-700 Operation Manual

Tripod Mounting

1
Attach the VCT-14 tripod adaptor (not
supplied) to the tripod.
Tripod adaptor
2
Mount the camcorder on the tripod
adaptor.
Slide the camcorder forward along the
groove in the adaptor until it clicks
To remove the camcorder from the tripod
adaptor
Hold down the red button and pull the lever in the
direction of the arrow.
Note
The tripod adaptor pin may remain in the engaged
position even after the camcorder is removed. If this
happens, press the red button against the lever a second
time and move the lever as shown above until the pin
returns to the stowed position. If the pin remains in the
engaged position, you will not be able to mount the
camcorder on the tripod adaptor.
Camera mount
Red button
Lever
Tripod Mounting 49