Sony POWER HD FX PDW-700 Operation Manual page 180

Function
ZOOM TELE/
d)
WIDE
ZOOM WIDE/
d)
TELE
SHOT MARK1 Assigns the function that
SHOT MARK2 Assigns the function that
CLIP FLAG
OK
CLIP FLAG
NG
CLIP FLAG
KEEP
FOCUS MAG
DIGITAL
e)
EXTENDER
UA01 to
f)
UA10
a) Even when the MARKER item is set to OFF on
the MARKER page of the USER menu, the
ASSIGN 1/3/4 switches allow you to display or
not to display all markers.
b) This function cannot be assigned to the RET
button on the lens.
c) Even if the RETURN VIDEO item is set to OFF
on the ASSIGNABLE SW page of the
OPERATION menu, you can use this switch to
display the image of the return video signal on
the viewfinder.
d) Only the Assign 3 SEL and Assign 4 SEL screens
appear.
180 Adjustments and Settings From Menus
Description
For use with a lens that
supports serial
communications, assign the
ZOOM TELE setting to
ASSIGN 3, and the WIDE
setting to ASSIGN 4.
For use with a lens that
supports serial
communications, assign the
ZOOM WIDE setting to
ASSIGN 3, and the TELE
setting to ASSIGN 4.
records a SHOT MARK 1
essence mark.
records a SHOT MARK 2
essence mark.
Assign the functions that set
or clear OK, NG, and KEEP
flags during recording or
playback.
Assigns the function that
magnifies the central part of
the viewfinder picture, for
easier focus adjustment.
(This function does not
affect recorded video or
other signal output.)
Assigns the function that
electronically magnifies the
central part of the picture.
(All video output is
magnified, including
recorded video.)
Assigns the items assigned
in the ASSIGN SEL menu.
e) Video momentarily becomes black and audio is
momentarily muted when the digital extender is
switched on and off.
f) This does not appear if nothing is assigned in the
Assign menu.
Functions to be assigned to the ASSIGN 2
(slide-type) switch
Function Content
OFF Assigns no function.
FRONT MIC Assigns the function that
switches between stereo and
monaural when a stereo
microphone is connected.
PICTURE Assigns execution of
CACHE recording in picture cache
mode.
SUPER Assigns a mixing switch
(VFDISP&M function that selects mixing or
ENU) no mixing of superimposed
viewfinder and menu text data
into the video signals output
from the SDI OUT 2 or TEST
OUT connector, when SDI
OUT 2 SUPER or TEST OUT
SUPER on the OUTPUT 1
page of the OPERATION
menu are set to ON.
MARKER Assigns the function that
displays or hides all
a)
markers.
REC VIDEO Switches the recording target
SOURCE video between the video shot
by the camera and the video
input from an external device
(VBS or SD-SDI/HD-SDI).
ZEBRA Assigns the zebra pattern
display function.
FREEZE MIX Assigns the function that
mixes a still picture
(monochrome) and camera
video (color) (effective for
framing shots).
DIGITAL Assigns the function that
c) electronically magnifies the
EXTENDER
central part of the picture. (All
video output is magnified,
including recorded video.)
UA01 to Assigns the items assigned in
d) the ASSIGN SEL menu.
UA10
b)