Sony POWER HD FX PDW-700 Operation Manual page 91

• Depending on the character type, the length of
name ("C*" part) may be limited to 14
characters. (The limit for ASCII characters is 56
characters.)
• All file name extensions are converted
automatically to uppercase.
• Titles are used as user-defined clip names on
this unit. Therefore, the available characters are
limited to those supported by the title function.
• Files generated along with clips and clip lists
are assigned the same names (the "C*" or "E*"
part of the following file names).
- Clips: Metadata files (C*M01.XML), user
metadata file (C*M02.KLV), proxy AV data
files (C*S01.MXF)
- Clip lists: Metadata files (E*M01.XML)
• The following names cannot be assigned.
- Clips: C0000.MXF
- Clip lists: E0000E01.SMI, E0100E01.SMI to
E9999E01.SMI, E0000.SMI, E0100.SMI to
E9999.SMI
• The following names should be avoided.
- Clips: C5000.MXF to C9999.MXF
- Clip lists: E0001.SMI to E0099.SMI
To assign clip names on this unit
The title assigned to a clip is also used as the name
of that clip (or the file name).
C0001.MXF
TITLE00001
When sub item "AUTO NAMING" is set to
"C****"
TITLE00001.MXF
TITLE00001
When sub item "AUTO NAMING" is set to
"TITLE"
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Before starting, set TITLE on the CLIP
TITLE page of the OPERATION menu
to ENABL and set a title (see page 88).
For details on menu operations, see "Basic
menu operations" on page 163.
2
Display the FILE NAMING page of the
OPERATION menu.
3
Select NAMING FORM and then press
the MENU knob.
4
Turn the MENU knob to display
"FREE" and then press the MENU
knob.
You can now enter a user-defined name.
028 FILE NAMING
NAMING FORM:
AUTO NAMING:
5
Turn the MENU knob to select "AUTO
NAMING" and then press the MENU
knob.
6
Turn the MENU knob to display
"TITLE" and then press the MENU
knob.
The same name will now be given to newly
recorded clips.
Notes
• An FTP client software that supports UTF-8 is
required to use Unicode characters other than ASCII
characters. Command prompt FTP commands do not
support UTF-8.
• When the first letter of the title setting on the CLIP
AUTO TITLING menu is a space or period (.), the clip
name is the title string minus the first letter.
To use clip names and clip list names by FAM
and FTP
Carry out steps 2 to 4 of "To assign clip names on
this unit" (page 91).
It is now possible to write, transfer, and rename
clips and clip lists with user-defined names over
Advanced Operations for Shooting
TOP
FREE
C****
91