Allow The Handset To Ring While Charging; Set Do Not Disturb - Cisco IP DECT 6800 Series User Manual

Allow the Handset to Ring While Charging

Procedure
Step 1
Press Menu
Step 2 Select Settings
Step 3
Highlight your choice.
• Normal (default): You press Answer/Send
• Any key: You can press any key to answer the call.
• Automatic: The incoming call is automatically answered.
Step 4 Press Select to save the setting.
Allow the Handset to Ring While Charging
If you don't want the handset to ring while it is charging, you can turn off the ringer. Incoming calls continue
to display on the screen.
Procedure
Step 1 Press Menu
Step 2
Select Settings
Step 3 Highlight your choice.
• Off (default): The handset will ring while on the charger.
• Silent: The handset won't ring will on the charger.
Step 4 Press Select to save the setting.

Set Do Not Disturb

You can set the handset to not disturb you when you get an incoming calls. This is called do not disturb (DND)
mode. When you are in this mode, you see the DND icon
DND is active, the call is sent to voicemail.
While in DND, many of the icons that display on the header are different from normal.
To use this feature, your administrator must enable DND.
Cisco IP DECT 6800 Series User Guide
64
.
> Auto answer.
.
> Silent charging.
to answer the call.
in the screen headers. If you get a call while
Settings