Download Print this page
Cisco DECT 6800 Manual
Hide thumbs Also See for DECT 6800:

Advertisement

Quick Links

Cisco DECT 6800 – How to Lock/Unlock Dial Pad on Handset
The Cisco 6800 DECT handset will allow you to disable or manually lock the keypad to stop accidental
dialing. When you lock the keypad, the softkey label does not display.
Procedure on how to lock the handset:
Press and hold Zero (0)
on the screen.
Procedure on how to unlock the handset:
Press and hold Zero (0)
display on the screen.
You can set up the handset to require a PIN to unlock it.
Procedure to set up handset unlock PIN:
1. Press Menu
2. Select Settings
3. Enter the PIN and press OK.
4. Highlight Phone lock.
5. Press Off to turn off the need for a PIN or On to require a PIN.
6. Select Change PIN.
7. Enter a new PIN and press OK. You must use four digits for the PIN.
8. Press Select to save the setting.
Note: The default PIN is 0000
Note: When the keypad is locked, you can only dial emergency numbers.
until the message "Press and hold 0" and the key lock icon is displayed
until the message "Press and hold *" and the key lock icon does not
>Security>Phone lock.
1 |
P a g e

Advertisement

loading

Summary of Contents for Cisco DECT 6800

  • Page 1 Cisco DECT 6800 – How to Lock/Unlock Dial Pad on Handset The Cisco 6800 DECT handset will allow you to disable or manually lock the keypad to stop accidental dialing. When you lock the keypad, the softkey label does not display.
  • Page 2 Set the Timer to Automatically Lock the Handset You can set the handset to lock the keypad after a specific length of inactivity. When the keypad locks, you need to unlock it before you can use it. Procedure: 1. Press Menu 2.