Handset Setup; Handset Hardware Installation; Handset Package Contents - Cisco IP DECT 6800 Series User Manual

Handset Setup

•
•
•
•
•

Handset Hardware Installation

Handset Package Contents

Your handset package has the following contents:
• Handset with attached belt clip. Inside the handset is the battery, with a piece of plastic over the battery
• Charging cradle with attached USB cable.
• Regional power adapter for the charging cradle.
• Plastic cover to replace the belt clip on the handset.
• Printed compliance document.
Related Topics
Handset Hardware Installation, on page 15
Handset Battery Charging, on page 21
Automatic Handset Configuration, on page 22
Manual Handset Configuration, on page 22
Handset Firmware Upgrades, on page 23
contacts.
Note You need to remove the plastic over the battery contacts. For more information,
see Install the Battery in the Handset, on page
Note Make sure that you save this small plastic cover, in case you need it.
Install the Battery in the Handset, on page 16
Handset Battery Charging, on page 21
2
C H A P T E R
16.
Cisco IP DECT 6800 Series User Guide
15