Table of Contents
Advertisement
Instructions for Use
2660021169042 Rev. A 2018-03
Result
NOTE
NOTE
2660021169042 Rev. A 2018-03
Click Finish.
u
ü When this review station connects to the network, it will
also connect to the instrument's shared folder.
11.4 Adding a Network Storage Device
It is your responsibility to protect exam data from loss.
To protect your exam data:
Backup the data archive frequently.
u
Use archival quality backup media.
u
Store backup media in a secure, remote location.
u
Users are responsible for network setup and maintenance.
Users are responsible for installing and configuring all
networking hardware and software.
ZEISS Technical Support is limited to testing instrument network
connectivity.
ZEISS Technical Support cannot troubleshoot or repair
u
problems with network connectivity.
Observe all guidelines in this document regarding instrument
u
networking.
The PLEX® Elite 9000 includes a 24TB NAS device for storing exam
data.
If additional storage becomes necessary, you can add another
external NAS or a dedicated computer with a large data storage
capacity to store more data.
11.4.1 NAS Device Requirements
An additional external NAS (or other data storage device) must
meet the following minimum requirements:
• Server class 800 MHz processor
• 8 TB storage
• Any current operating system that supports NTFS drive
partition(s) for PLEX® Elite 9000 data. PLEX® Elite 9000 data is
compatible only with NTFS on network drives.
In addition, we recommend the following:
• A RAID array for data storage to provide data redundancy in
the event of a drive failure—strongly recommended
• An uninterruptible power supply (UPS)—strongly recom-
mended
• 1000 BaseT network connection
• 24 TB of offsite secure (cloud) data storage
11 Networking
11.4 Adding a Network Storage Device
179 / 246
Advertisement
Table of Contents
