Testing The Automatic Audio Level Adjusting - Sony DNW-7/7P Operation Manual

3
Set the F-RUN/SET/R-RUN switch to R-RUN.
4
Set the DISPLAY switch to CTL.
5
Press the VTR START button and check the following points.
• The tape reels are turning.
• The counter indication is changing.
• The REC indicator in the viewfinder is on.
• The RF and SERVO indicators on the display panel are off.
6
Press the VTR START button again, and check that the tape stops
and that the REC indicator in the viewfinder goes off.
7
Repeat the checks of steps 5 and 6, this time using the VTR button
6
on the lens.
8
Press the RESET button, and check that the counter display goes to
"00 : 00 : 00 : 00".
9
Turn on the LCD LIGHT switch, and check that the display panel is
illuminated.
10
Hold down the REW button to rewind the tape for a while, then
press the PLAY button. Check that the rewind and playback
functions operate normally.
11
Press the STOP button and press the F FWD button. Check that the
fast forward function operates normally.

2 Testing the automatic audio level adjusting

functions
1
Set the AUDIO SELECT CH-1/CH-2 switches to AUTO.
6-6
Chapter 6 Maintenance