Installation And Dismounting Of Wall; Extensions - PRONAR PT610 Operator's Manual

Agricultural trailer
Table of Contents

Advertisement

SECTION 5
Screw the connecting pipe (3) to the apexes (1) and (2),
Place tarpaulin cover (5) so that it rests on the limiters on the right side of the
trailer,
Secure the tarpaulin fastening straps (6) to the tarpaulin cover hooks (7)
riveted to the right wall of load box,
unroll tarpaulin using the rolling beam (4) and secure with fastening straps (6)
to holders (7) located on the left side of the trailer,
Tighten tarpaulin and secure with fastening straps (6) the front and rear part of
the tarpaulin.
Disassembly of the frame and tarpaulin cover should be performed in reverse order.
DANGER
Assembly and disassembly of the frame should be carried out with the use of appropriate
platforms, ladders or when standing on a ramp. These tools must be in good condition to
fully protect the persons working on them against falling. Work should be performed by at
least two persons. Exercise particular caution.

5.12 INSTALLATION AND DISMOUNTING OF WALL

EXTENSIONS

Extension mounting
Secure rear extension stakes to rear side stakes.
Install front wall extension.
Install rear wall extension.
Install side wall extensions.
Screw in extension ladder to the front wall.
First place upper pins of extension in appropriate rear stake locks and
front walls, and after that secure base of extensions with the aid of pin
lugs to upper part of side walls.
5.39
Pronar PT610

Advertisement

Table of Contents
loading

Table of Contents