Pronar PT610
The filter element and the filter body should be carefully cleaned and blown
through with compressed air. Assembly should be done in reverse order.
Cleaning the air filter (filters):
5.3.4
DRAINING WATER FROM AIR TANK
FIGURE 5.9
Draining water from air tank
(1) drain valve, (2) air tank
Required maintenance actions
Open drain valve (1) placed in lower part of tank (2) - tank is placed in rear
part of turntable frame
Hold the filter cover (2) with the other hand. After removing slide lock,
the cover is pushed off by the spring located in the filter housing.
• every 3 months of use,
5.20
SECTION 5