Storage - PRONAR PT610 Operator's Manual

Agricultural trailer
Table of Contents

Advertisement

SECTION 5
should be maintained with the aid of special preparations after previous thorough
washing.
• After completed washing wait until the trailer is dry and then grease all inspection
points according to recommendations. Remove excess oil or grease with a dry
cloth.
• Observe environmental protection principles and wash trailer in a place designed
for this purpose.
• Cleaning and drying of the trailer must take place at temperatures above 0
• After washing and drying, trailer should be greased at all control points regardless
of previous date of lubrication.

5.9 STORAGE

• Trailer should be kept in a closed or roofed building.
• If the machine will not be used for a long time, it is essential to protect it from
adverse weather, especially rust and accelerated tyre deterioration. During this
time the machine must be unloaded. Trailer should be very carefully washed and
dried.
• Corroded places should be cleaned of rust, degreased and protected using
undercoat paint and then painted with surface paint according to colour scheme.
• In the event of a prolonged work stoppage, it is essential to lubricate all
components regardless of the date of the last lubrication.
• Wheel rims and tyres should be carefully washed and dried. During longer
storage of unused trailer it is recommended that every 2 to 3 weeks the machine
may be moved a bit so that the place of contact of tyres with ground is changed.
The tyres will not be deformed and maintain proper geometry. Also, air pressure
in tyres should be inspected from time to time and, if necessary, pressure should
be increased to appropriate value.
• If trailer is equipped with tarpaulin cover, it should be carefully washed and dried.
If possible, clean tarpaulin cover should be stored unrolled, otherwise carefully roll
it without folding and breaking the material.
5.35
Pronar PT610
o
C.

Advertisement

Table of Contents
loading

Table of Contents