Lindy 38266 User Manual page 26

Manual
SET_FRAME_RATE N1
SET_VW_OSD N1 {N2}
SET_VW_LAYOUT N1 N2 {N3}
SET_VW_POS N1 N2 {N3}
SET_VW_BC N1 N2 N3 N4 {N5}
SET_VW_HSCALE N1 {N2}
Set the percentage of frames from the source video to encode.
N1 = 2~100
Enable/disable video wall OSD to display the Target Receiver number on the
0 [Disable]
1 [Enable]
N2 = 0~255
Note: Target Receiver number can be obtained by turning on the Video Wall
Set the video wall's total horizontal and vertical display count.
OSD. Omitting N2 makes the setting global to all Receivers.
N1 = 1~16 [Horizontal display count]
N2 = 1~16 [Vertical display count]
N3 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained by turning on the Video Wall
OSD. Omitting N3 makes the settings global to all Receivers.
Set the display's position within the video wall. (Cannot exceed the video wall's
horizontal and vertical display count.)
N1 = 0~15 [Row]
N2 = 0~15 [Column]
N3 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained by turning on the Video Wall
OSD. Omitting N3 makes the settings global to all Receivers.
Set the video wall display's bezel
N1 = 0~99999 [Video width]
N2 = 0~99999 [Total display width] N3 = 0~99999 [Video height]
N4 = 0~99999 [Total display height]
N5 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained by turning on the Video Wall
OSD. Omitting N5 makes the settings global to all Receivers.
Set the video wall display's horizontal zoom amount.
N1 = 0~99999 [Zoom amount in 1 pixel units]
N2 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained by turning on the Video Wall
OSD. Omitting N2 makes the setting global to all Receivers.
23
[Frame Percent]
designated display.
Available values for N1:
[Target Rx {Optional}]
compensation values.
English