Lindy 38266 User Manual page 27

Manual
SET_VW_VSCALE N1 {N2}
SET_VW_SHIFT N1 N2 {N3}
SET_VW_DELAY N1 {N2}
RECEIVER UNIT (No.38267) – Specific TELNET commands description
COMMAND SINTAX
SET_EDID_COPY N1
GET_EDID_COPY
R N1
GET_RX_CHANNEL
Set the video wall display's vertical
N1 = 0~99999 [Zoom amount in 1
N2 = 0~255
Note: Target Receiver number can be obtained by turning on the Video Wall
OSD. Omitting N2 makes the setting global to all Receivers.
Set the video wall display's output shift.
Available values for N1: U
D [Shift down]
L [Shift left]
R [Shift right]
N2 = 0~80000 [Pixel shift amount. Must be in increments of 8.]
N3 = 0~255
Note: Target Receiver number can be obtained by turning on the Video Wall
OSD. Omitting N3 makes the setting global to all Receivers.
Set the video wall display delay.
N1 = 0~99999 [Delay inmicroseconds]
N2 = 0~255 [Target Rx {Optional}]
Note: Target Receiver number can be obtained by turning on the Video Wall
OSD. Omitting N2 makes the setting global to all Receivers.
Copy and use the EDID of the connected display.
0 [Disabled]
1 [Enabled]
Show the state of the EDID copy function.
Select the VoIP transmission channel to display.
Show the currently selected VoIP transmission channel.
24
zoom amount.
pixel units]
[Target Rx {Optional}]
[Shift up]
[Target Rx {Optional}]
DESCRIPTION
Available values of N1:
N1 = 0~255
English