Lindy 38266 User Manual page 11

Manual
The Video Wall tab is optional, and will not show up in the WebGUI tab list unless the "Enable Video Wall" checkbox
on the Functions tab is checked. It is not required to activate the Video Wall tab on Transmitters used within video
wall systems.
•
Bezel and Gap Compensation
This section of the Video Wall tab is used to define the physical dimensions of each display being used in the video
wall. Accurate measurements are needed of the monitor's outer frame (OW, OH) and the video screen (VW, VH).
The measurements may be made using any unit of measurement (inches, mm, cm, etc.) as long as ALL
measurements in the same wall are made using the exact same units and the numbers are integers.
- OW (Outer Width): This is the horizontal measurement of the displays outer case.
- OH (Outer Height): This is the vertical measurement of the displays outer case.
- VW (Video Width): This is the horizontal measurement of the displays video screen.
- VH (Video Height): This is the vertical measurement of the displays video screen.
Note: Typically all monitors in a video wall are identical and have the same dimensions, but it is possible to use
differently sized displays as long as the same measurement units are used to measure each display and the displays
are still arranged in a normal rectangular layout with corners meeting at the same place.
8
English