Lindy 38266 User Manual page 10

Manual English
The Utilities window allows users to reset the unit back to the factory defaults by clicking "Factory Default". The unit
may be rebooted (without resetting settings) by pressing the "Reboot" button.
If the EDID received from the primary Receiver unit (selected via a checkbox on the preferred Receiver in Multicast
mode) has compatibility issues with the connected HDMI source, the internal HDMI EDID (up to 4K30 w/audio) or
VGA EDID (up to WUXGA wo/ audio) can be selected. Please press "Apply" after making the selection.
Note: This EDID setting will be reset if the unit is rebooted.
Finally, individual Telnet commands may be sent to the unit by using the "Console API Command" text entry field
and pressing "Apply". Any responses from the unit will be displayed in the "Output" field.
•
Statistics
The Statistics window shows all available information about the operational status of the unit, including current Host
ID Name, Ethernet information, MAC address, unicast/multicast mode, link status and mode.
Video Wall Tab
The Video Wall tab allows user to design, edit and manipulate a video wall system created using multiple Receiver
units connected to identical displays. The bezel and video size of the displays being used, as well as the horizontal
and vertical monitor count, is defined here. Video stretch and rotation can also be controlled on this tab. Receivers
in the video wall group (all Receivers sharing the same channel) can be controlled by any other unit within the same
group. The Video Wall tab is accessible on both Transmitters and Receivers, however video wall settings may only
be applied to Receiver units.
When saving changes on the Video Wall tab, remember to select the appropriate "Apply To:" target unit before
pressing the "Apply" button. To make changes to the unit you are currently connected to, select "This" as the target.
Otherwise, select the IP address of the Receiver (Client) you want to apply changes to from the "Apply To:" drop
down.
Notes:
While it is possible to create small video walls using unicast mode, in order to more efficiently use the available
network bandwidth, it is strongly recommended to only use multicast mode when creating video walls.
7