Table of Contents
Advertisement
Manual
•
Utilities
The Utilities window allows users to reset the unit back to the factory defaults by clicking "Factory Default". The unit
may be rebooted (without resetting settings) by pressing the "Reboot" button.
Individual Telnet commands may also be sent to the unit by using the "Console API Command" text entry field and
pressing "Apply". Any responses from the unit will be displayed in the "Output" field.
•
Statistics
The Statistics window shows all available information about the operational status of the unit, including current Host
ID Name, Ethernet information, MAC address, unicast/multicast mode, link status and mode.
Video Wall Tab
The Video Wall tab allows user to design, edit and manipulate a video wall system created using multiple Receiver
units connected to identical displays. The bezel and video size of the displays being used, as well as the horizontal
and vertical monitor count, is defined here. Video stretch and rotation can also be controlled on this tab. Receivers
in the video wall group (all Receivers sharing the same channel) can be controlled by any other unit within the same
14
English
Advertisement
Table of Contents
