Failure to follow these
instructions can result in death, fire,
or electrical shock.
Improper connection of the
equipment grounding conductor
may result in electric shock.
If you are in any doubt as to whether
the appliance has been properly
grounded, have the appliance
checked by a qualified electrician or
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer will
not be held responsible for damage
or injury arising from unauthorized
Before installing the appliance,
verify that the voltage, load and
circuit rating information found on
the data plate match the household
Do not ground to a gas pipe.
Check with a qualified elictrician if
you are not sure the appliance is
properly grounded. Do not have a
fuse in the neutral or grounding
Electrical grounding required. This
appliance is equipped with a
three-prong (grounding) polarized
plug for your protection against
possible shock hazards.
Do not remove the round grounding
prong from the plug.
Do not use a two-prong grounding
Do not use extension cords or
ungrounded (two prong) adapters.
Connect this appliance to a 110 –
120 VAC, 60 Hz and 15 amp (20 amp
for side-by-side) circuit (20 amp for
side-by-side) with a circuit breaker or
This appliance should have its own
separate grounded circuit.
The power cord is equipped with a
three-prong (grounding) plug for your
protection against potential electrical
shock. To maintain this protection:
– Do not modify the plug by removing
the round grounding prong.
– Do not use a two-prong adapter.
Where a two-prong wall outlet is
encountered, contact a qualified
electrician and have it replaced with
a three-prong outlet in accordance
with the local electrical codes and
– Do not use a power cord that is
frayed or damaged.
– Do not connect the appliance using
an extension cord or extension