Display Brightness S - Miele KWT 6322 UG Operating And Installation Instructions

Display brightness s

The display brightness can be adjusted
to suit lighting conditions in the room.
The display brightness can be adjusted
in steps from 1 to 3. The factory default
setting is 3 (maximum brightness).
Altering the display brightness
^ Touch the settings sensor.
All symbols available for selection will
appear in the display and the 0 symbol
flashes.
^ Touch the sensors for setting the
temperature (X or Y) repeatedly until
the s symbol flashes.
^ Touch the OK sensor to confirm your
choice.
The last selected setting flashes and
the s symbol lights up in the display.
Selecting further settings
^ By touching the X or Y sensor you
can now alter the brightness of the
display:
1: dimmest setting
2: medium setting
3: brightest setting.
^ Touch the OK sensor to confirm your
choice.
The selected setting is applied, the s
symbol flashes.
^ Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits
settings mode automatically after
approximately one minute.
23