Temperature Display Brightness - Miele KWT 6321 UG Operating And Installation Instructions

Temperature display brightness

The default brightness for the
temperature display is set to ^1.
To change the brightness of the
temperature display (the temperature
displays will change together):
^ Touch and keep your finger on the
DynamicCooling On/Off sensor for
approx. 5 seconds.
The sensor's indicator light flashes and
a ; flashes in the temperature display
for the lower wine conditioning zone
(display on the right).
^ Keep touching one of the
temperature setting sensors until you
see ^ in the display.
^ Touch the DynamicCooling function
On/Off sensor again.
^ will light up in the display.
Temperature and air quality
^ You can now change the brightness
of the display by touching the
temperature setting sensors. You can
choose levels of brightness from 1 to
5.
1: minimum brightness
5: maximum brightness.
^ To save the setting, touch the
DynamicCooling function On/Off
sensor.
^ To exit settings mode, touch the
On/Off sensor for the whole
appliance, or wait for
approx. 2 minutes and the
electronics will automatically revert to
normal operation.
21