Ethernet Cable; Ethernet Connection Examples - YASKAWA MP2600iec Hardware Manual

9.3 Ethernet Cable

9.3 Ethernet Cable
For the Ethernet cable, use a twisted pair cable with RJ-45
connector. Yaskawa strongly recommends the use of shielded
ethernet cables. Ethernet ports are capable of auto-crossover, so
crossover cables are not necessary.

9.4 Ethernet Connection Examples

Connection Example 1 (
SGDV with
MP2600iec
100Base-TX
Up to 100m
Up to 100m
Specification
28
Up to 100m
100Base-TX
Ethernet Switch
Up to 100m
Station*
Item
Cable Length between Node-HUB
Cable Length between HUBs
Number of HUBs between Nodes
When using a repeater HUB)
Station*
Up to 100m
* Note: The MP2600iec can only be plugged into
Station*
a 100Base-TX Ethernet port.
When Connecting to a
Ethernet Switch
100 m or less
100 m or less
Unlimited
Station*
Up to 100m
100Base-TX
Ethernet Switch