Modify Low Battery Time; Calibration Mode; Computer Mode; Remote Monitor Mode - Eaton Powerware 9315 Installation And Operation Manual

13.6.8

Modify Low Battery Time

This menu allows you to modify the low battery time warning. When selected, the
following menu will be displayed:
Modify Low Battery Time
Low Battery Time (Minutes): 004
Enter New Low Battery Time:
NOTE: Low Battery Time should be no greater than 999. Enter <CR> to return with
no change.
Enter the new time desired to change the warning level.

13.7 Calibration Mode

Calibration mode is used by factory and field service personnel to calibrate system
meters. Factory test engineers calibrate the SBM meters prior to shipping so the
SBM arrives at your site correctly calibrated. After use, field service personnel may
need to use Calibration mode to recalibrate one or more meter settings.
NOTE: Calibration mode is for use by service personnel ONLY. To prevent
inadvertent modification, this mode can be accessed only by trained
personnel.

13.8 Computer Mode

This mode provides a computer interface which gives your system compatibility
with system monitoring and network products. For a list of products available,
contact your sales representative.

13.9 Remote Monitor Mode

This mode provides the interface for the RMP , RIM, or SCM described earlier.
EATON Powerware 9315 Parallel Capacity/Redundant System
164201150 Rev. E www.powerware.com
13−15