Sipra H1 (Sinec Protocol Analyzer) - Siemens SINUMERIK 840 Planning Manual

08.89 7 Configuration and Test

7.2.5 SIPRA H1 (SINEC Protocol Analyzer)

7.2.5 SIPRA H1 (SINEC Protocol Analyzer)
The SIPRA H1 bus test software is used to monitor the message frame traffic on the SINEC
H1 bus. For this purpose, a PG 685 with a CP 536 communication processor is required. The
connection can be made on a transceiver which is already available in the system.
SIPRA H1 makes it possible to monitor and store the message frames sent over the SINEC
H1 bus (layers 1 to 4 in plain text including useful data). Various conditions can be specified
for this process, e.g. the entire bus traffic or only the traffic between 2 particular stations can
be recorded.
Furthermore, trigger conditions can be specified.
For display on the screen the headers of layers 2 to 4 of the OSI seven layer model are
represented already decoded. The headers of the other protocol layers and the useful data are
displayed both in hexadecimal and in ASCII format.
7–15
© Siemens AG 1989 All Rights Reserved 6FC5 197-0AB20-0BP0
SINUMERIK 840/880 (PJ)