Table of Contents
Advertisement
7 Configuration and Test
7.1.4 SINPS 315
7.1.4
SINPS 315
The SINUMERIK-specific and connection-oriented configuring data is stored on the serial
interface module CP 315 in lists which have to be configured by the user.
SINPS 315 (SINUMERIK configuration service for CP 315) is a software package for the
generation of the configuring data which are required by the serial interface module.
The SINPS 315 configuration software is executable on:
•
PG 685 and PG 685T under PCP/M86
•
PC AT under MS-DOS
With SINPS 315, the SINUMERIK-specific configuring data (input list 1, output list 1, format
list) and connection-oriented configuring data (addressing list, list of interfaces) are generated
on the PG or PC AT.
The configuring data is transferred from the PG or PC AT to the interface module via the
programmer interface of the serial interface module CP315 (figure "Configuration of CP315").
The data of input list 1, output list 1, format list, addressing list and list of interfaces is valid for
the CP 315 basic board and the CP 373 expansion board.
It is stored on the CP 315 basic board.
Device
management
SINUMERIK
driver
CP 315/373
CNC
Configuration of CP 315
7–6
AP monitor
Test
Local
DS
© Siemens AG 1989 All Rights Reserved
PG 685/PC AT
SINPS 315
Input
SIN
DB
6FC5 197-0AB20-0BP0
SINUMERIK 840/880 (PJ)
06.91
Advertisement
Table of Contents
