Sint - Siemens SINUMERIK 840 Planning Manual

06.91 7 Configuration and Test
7.2 Test and simulation
Simulation
Simulation
PG 675/685 with PC1 6-11 /20 with
or Computer or
FOX-PGS-SW SIM 850-SW
Monitoring
Read out/configure trace buffer
PG 675/685 with
PG 685/685T/PC AT
with SINT-SW
FOX-PGM-SW
CP 315
SINUMERIK
8X0
Test configuration for point-to-point connection
7.2.1

SINT

With the aid of the SINUMERIK test software SINT the message frames can be traced on
application plane in input and output direction and represented in readable form on the PG or
PC AT.
For this purpose, the trace buffers on the interface modules are read out. It is possible to
define message frame selection, connection selection and various trigger conditions so that
the message frames and trace data can be indicated selectively. This is achieved via the
menu-driven screen form software.
By assigning parameters the communication data to be entered into the trace buffers and
displayed on the PG or PC AT screen is defined.
With the aid of the format lists the data is displayed in a comprehensible form.
The traced data can be printed out. Communication between the PG/PC AT and the interface
modules is via the TTY interface of the interface modules.
Furthermore, the exception trace entries in the interface modules can be read out with SINT.
7–13
© Siemens AG 1989 All Rights Reserved 6FC5 197-0AB20-0BP0
SINUMERIK 840/880 (PJ)