Specifications; Approvals - Danfoss MCX-RTU User Manual

User Guide | MCX-RTU Rooftop

Specifications

Approvals

© Danfoss | ADAP-KOOL® | 2018.11
Supply Voltage
85 – 265 V AC, 50/60 Hz Maximum power consumption: 27 W, 48 VA insulation between power
supply and the extra-low voltage: reinforced
Modbus
It is important that the installation of the data communication cable be installed correctly.
Remember to terminate each end of the bus. EIA485 Rated cable must be used.
See separate literature No. RC8AC902.
DO - Digital outputs, 15 pcs. DO1 – DO15
DO1 - DO15, all are mechanical relays, no solid state relays
AO - Analog output, 6 pcs. AO1 – AO6
Outputs are 0 – 10 V DC by default
AI - Analog Inputs, 14 pcs. AI1 – AI14
All temperature sensors default to PT1000, Pressure transducers default to .5 – 4.5 V DC
ratiometric with 5 V DC supply. All other inputs are 0 – 5 V DC by default
DI - Digital switch inputs DI1 – DI17
All Dry contacts except DI17 (24 V AC or 230 V AC driven)
AK-SM 800 Firmware required to interface with the MCX-RTU must be VG8.033 or greater and
StoreView Desktop version 1.13 or greater must be used for remote access.
EU Declaration of Conformity
This product is in conformity with the following directive(s), standard(s) or other normative
document(s), provided that the product is used in accordance with our instructions.
EMC directive 2014/30/EU
By fulfilling the requirements in the following standards
EN 61000-6-4: 2007 + A1: 2011 Generic standards. Emissions standard for industrial environments
EN 61000-6-2: 2005 Generic standards. Immunity for industrial environments
and
LVD directive 2014/35/EU
By fulfilling the requirements in the following standards
EN60730-1: 2011 Automatic electrical controls for household and similar use. General
requirements
EN60730-2-9: 2010 Particular Requirements for Temperature Sensing Controls
and
RoHS Directive 2011/65/EU
By fulfilling the requirements in the following standards
EN 50581:2012
UL Approval
UL file: E31024
RS8KE102 | 4