Danfoss MCX-RTU User Manual page 21

User Guide | MCX-RTU Rooftop
© Danfoss | ADAP-KOOL® | 2018.11
HnS HT Night Set- Aux Heat Mode Night Setback (0.0-30.0K)
back
Htd Gas Fan Delay Gas - Fan Delay Off (0-600)
Off
HTs HT SupplyAir Aux Heat Mode Supply Air Target for VS
Fan (0.0-100.0°C)
Hm1 HT Min Fan Aux Heat Mode Min Fan Speed (0.0-100.0)
Speed
Hm2 HT Max Fan Aux Heat Mode Max Fan Speed (0.0-100.0)
Speed
HTi HT PI Integ Time
HTg Heat PI Gain
HUM Parameters > Function
Dehumd
Dt1 DH1 Target Dehumidification 1 Target Temperature
(10.0-40.0°C)
Db1 DH1 PreDelay Dehumidification 1 Pre Delay (0-240)
Da1 DH1 PostDelay Dehumidification 1 Post Delay (0-240)
Dt2 DH2 Target Dehumidification 2 Target Temperature
(10.0-40.0°C)
HUM Parameters > Function
Dehumd
Db2 DH2 PreDelay Dehumidification 2 Pre Delay (0-240)
Da2 DH2 PostDelay Dehumidification 2 Post Delay (0-240)
Dt3 DH3 Target Dehumidification 3 Target Temperature
(10.0-40.0°C)
Db3 DH3 PreDelay Dehumidification 3 Pre Delay (0-240)
Da3 DH3 PostDelay Dehumidification 3 Post Delay (0-240)
Dt4 DH4 Target Dehumidification 4 Target Temperature
(10.0-40.0°C)
Db4 DH4 PreDelay Dehumidification 4 Pre Delay (0-240)
Da4 DH4 PostDelay Dehumidification 4 Post Delay (0-240)
DHr DH Range +/- Dehumidification Range +/- (0.0-10.0K)
DH1 DH Ambient Dehumidification Mode Ambient Lockout
Lockout (0.0-85.0°C)
DH2 DH Lockout Dehumidification Mode Ambient Lockout
Range +/- Range +/- (0-10.0K)
DnS DH Night Set- Dehumidification Mode Night Setback
back (0.0-30.0K)
DrT DH Reheat Dehumidification Reheat Target (0.0-
Target 40.0°C)
DrR DH Reheat Dehumidification Reheat Range +/- (0.0-
Range +/- 30.0K)
DH3 Max_Capacity Period for compressors at max capacity
Period before VS Fan will modulate. (0-60)
Dp1 Cp1 Press Target Dehumidification Compr 1 Pressure Target
(0.0-100.0)
0.0 K/F
60 s
30.6 °C/°F
50.0 %
75.0 %
Default Units
100.0
240 m
240 m
100.0
Default Units
240 m
240 m
100.0
240 m
240 m
100.0
240 m
1000 m
10.0
100.0 °C/°F
10.0 K/F
30.0
40.0 °C/°F
30.0 K/F
2 m
8.2 bar/psi
RS8KE102 | 21