Schedule Enable; How It Works - Danfoss MCX-RTU User Manual

User Guide | MCX-RTU Rooftop

Schedule Enable

© Danfoss | ADAP-KOOL® | 2018.11

How it works

On the AK-SM 800, select the MCX-RTU to assign a schedule and select the Schedule tab.
(Note: it is preferred to set up schedules under configuration -> Refrigeration -> Schedules – see
page 28)
If no schedule has been setup, you will see a screen, similar to the one below. If there is no sche-
dule the MCX-RTU will follow the configuration of the unit.
To add a schedule, double click on the "Num of schedules" and set the number of schedules.
Each schedule allows programming a Start and Stop time.
This On/Off Schedule will completely shutdown the MCX-RTU between midnight and 9:45 AM.
This Eco/Com Schedule will place the MCX-RTU in night setback from 10:00pm to 6:45am.
RS8KE102 | 25