Connecting The Water Supply - Miele KFN 37692 iDE Operating And Installation Instructions

Connecting the water supply

Before establishing the mains water
connection, ensure that the
appliance is disconnected from the
power supply.
A stopcock with ¾" thread must be
incorporated when connecting to the
water supply.
Before using the appliance for the first
time, the water supply pipework should
be purged of air by a qualified and
competent person.
– The stainless-steel hose should be
filled with as much water as possible
immediately before connecting to the
solenoid valve.
– Mop up any spillages with a cloth.
 Connect the straight end of the
stainless-steel hose to the stopcock.
Ensure that it is screwed into
position correctly.
Mains water connection
 The stainless-steel hose should be
attached to the solenoid valve at the
bottom of the appliance at the back.
 Secure the stainless-steel hose to the
appliance housing with the retaining
clip.
Ensure that the connections are tight
and leak-proof.
 Slowly open the water supply
stopcock and check the whole water
system for leaks.
 The appliance can now be connected
to the power supply (see "Electrical
connection").
 Push the appliance into its final
position.
When doing so, make sure that the
stainless-steel hose is not kinked or
damaged.
After a maximum of 24 hours, the first
ice cubes will drop out of the ice-cube
maker and collect in the drawer.
85