Cleaning The Ice Cube Tray - Miele KFN 37692 iDE Operating And Installation Instructions

The ice-cube maker will then switch off.
 Carefully remove, the ice-cube
drawer, which will be full of water.
Empty and clean it.
The ice-cube tray cannot be removed
and must be cleaned in situ.
 Dry the ice-cube tray  with a soft
cloth.
When the ice-cube maker is switched
back on again, the ice-cube tray will
rotate back into the original position.

Cleaning the ice cube tray


Clean the ice cube tray,
– before switching off the ice cube
maker for a long time.
– regularly, to remove ice and water
residues.
If you have previously selected the
setting "Rinse the ice cube
maker" (see "Rinsing the ice cube
maker"), the ice cube tray will already
be in the cleaning position.
The ice cube tray  cannot be
removed and must be cleaned in situ.
To clean the tray you need to move it
into the cleaning position.
Cleaning and care
Selecting the cleaning position
The setting can only be selected if the
ice cube maker is switched on.
 Empty the ice cube drawer.
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the 
symbol flashes.
 Touch the sensors for setting the
temperature ( and ) repeatedly
until the ice cube maker symbol 
flashes in the display.
 Touch the OK sensor to confirm your
selection.
 By touching the  and  sensors,
you can now select the setting you
want:
0: the ice cube maker is switched off
1: the ice cube maker is switched on
2: set the water volume
3: select the ice cube tray cleaning
position
4: rinse the ice cube maker
 Touch the OK sensor to confirm your
selection.
The selected setting will be applied and
you will hear the ice cube tray rotate
into an angled position.
 Wait until the ice cube tray has
completed this rotation before
continuing.
61