Switching on and off
Before using for the first time
Packaging material
Remove all packaging material from
the inside of the appliance.
Protective foil
The stainless-steel trim on the interior
shelves and door shelves in the
appliance has a layer of protective foil
to prevent scratching in transit.
Remove this protective foil once the
appliance has been installed.
Cleaning the appliance
Please refer to the relevant
instructions in "Cleaning and care".
Important! Each time it is used the
Miele stainless steel conditioning
agent forms a water-repellant and dirt-
repellant protective coating.
Treat stainless steel surfaces with the
Miele Care product for stainless steel
immediately after removing the
protective foil (see "Optional
accessories").
Clean the inside of the appliance and
the accessories.
Clean the ice-cube maker: after
selecting the "Rinse ice-cube maker"
setting, the ice-cube maker and the
water supply pipework will be rinsed
automatically with water.
22
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
A tone will sound each time a sensor is
touched. You can deactivate this, if you
wish (see "Selecting further settings -
Audible tones").
Switching on
When the appliance is connected to the
electrical supply, the mains connection
symbol will appear in the display
after a short while.
Touch the On/Off sensor.
The mains connection symbol goes
out and the appliance starts to cool
down.
The sensor controls for the available
cooling sections appear in the control
panel:
The refrigerator section sensor control
is highlighted in yellow and the current
temperature in the refrigerator appears
in the display.