Adjusting The Interior Fittings; Adjusting The Door Shelf / Bottle Shelf; Adjusting The Bottle Holder; Moving The Adjustable Shelves / Adjustable Shelves With Lighting - Miele KFN 37692 iDE Operating And Installation Instructions

Adjusting the interior fittings

Adjusting the door shelf /
bottle shelf
Risk of injury!
Only move door shelves / bottle
shelves when they are empty.
 Push the door/bottle shelf upwards,
then remove it by pulling it forwards
 Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.

Adjusting the bottle holder

The bottle holder can be moved left or
right to create more room for drink
cartons.
The bottle holder can be removed
completely (e.g. for cleaning):
 Push the bottle shelf upwards, then
remove it by pulling it forwards
 Pull the bottle holder upwards to
remove it from the rear edge of the
bottle shelf.
46
Moving the adjustable
shelves / adjustable shelves
with lighting
The shelves can be adjusted according
to the height of the food.
 Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
 Push the shelf in until it clicks into
position.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
Stoppers prevent the shelves from
being dislodged by mistake.
Adjustable shelves with lighting
The LED lighting is located in the
stainless steel trim of the adjustable
shelves. You can illuminate the
refrigerator section as you wish by
moving the shelves.