Installing the appliance
Snap off any protruding ends from
the securing bracket. They are no
longer required and can be disposed
of.
Replace covers and on the
fixing brackets.
104
For additional stability of the
appliance in the unit, push the rods
supplied in underneath the appliance
between it and the floor of the housing
unit:
Then secure handle to one of the
rods .
Use the handle to push the rod into
the guide as far as it will go. Remove
the handle and fit it to the other rod
and push this into its guide as far as it
will go. Important! Keep the handle
somewhere safe in case you ever
need to fit the appliance into a new
housing unit
Close the appliance doors.